Positive and negative toolingArray drawing reviewOptical inspection
Home / Patch outlines, adhesive borders and needle fields

Patch outlines, adhesive borders and needle fields

Show the die-cut perimeter and patterned needle field separately on cosmetic patch CAD drawings and sampling briefs.

Draw three boundaries

A crescent may have an outer cut edge, an adhesive border and a smaller patterned field. Show the boundaries in separate layers or with clearly named line styles. A single outline sent by email leaves the tooling vendor to guess how much of the shape carries features.

Angled specimen photograph showing a rectangular support and the full field of raised features.
Array on its rectangular supportAldawood and colleagues show the field and its supporting edge in the same view.
Image creditsFaisal Khaled Aldawood, Abhay Andar and Salil Desai · Image source · CC BY 4.0 · Original figure proportions and markings retained; converted to WebP.
Scanning electron micrograph of a single irregular raised feature with an opening and a textured surface.
Irregular feature under SEMThe visible contour and opening give a reviewer specific features to mark when requesting a second view.
Image creditsFaisal Khaled Aldawood, Abhay Andar and Salil Desai · Image source · CC BY 4.0 · Original figure proportions and markings retained; converted to WebP.

Compare left and right pieces

Under-eye patches may be supplied in mirrored pairs. Identify a stable orientation mark and show the same viewing side for both drawings. On a sample carrier, write down whether the pieces are presented skin-facing up or down so the field position can be compared consistently.

Separate a tool change from a die change

A request to widen the smooth margin might move the field, the cut edge or both. Circle the intended change on the overlay. Ask which components are affected before authorizing new tooling or revising the sample specification.

Can a buyer verify the field location against the finished outline?

The research layouts shown by La Malfa and colleagues distinguish individual feature fields and use a positional reference. For an eye-shaped cosmetic patch, define a comparable reference on the outline drawing, such as the end facing the nose. Ask for the field boundary in that same view and a marked photograph of the assembly for orientation. A separate dimension for the distance between field and outline helps a buyer compare two samples that appear almost identical at first glance.

La Malfa et al. (2025) · Reference features and coded arrays in mold replication

Prepare your inquiry

Show the cut line, adhesive boundary and needle field separately.

Select the items you want to ask about.